$10

An industry-leading, everyday indicator available an aluminum or IP69K stainless steel with a choice of industry leading display technologies

Click For other scale indicators products

  1. Features
    • Hi-vis display to improve productivity.
    • Adaptable for a variety of industrial environments

    • Protective aluminum enclosure for office environments

    • A  robust IP69K certified stainless steel enclosure for harsh indoor or outdoor use,

    • or a stainless steel panel mount design for control room applications.

  2. Specifications
    Operating Applications :
    General weighing, accumulation, check weighing, counting, peak measurement, batching and remote displayUnit of Measure:
    Six, configurable (Pounds, Kilograms, Ounce, Gram, Pound/Ounce, Custom)Capacity Selections:
    9,999,999 with decimal located zero to five placesIncremental Selections:
    Multiples and sub-multiples of 1, 2, 5Programmable Selections :
    Zero range, motion detection, automatic zero tracking, five point linearizationTime and Date:
    Battery backed up time/date/year (12 hr or 24 hour format)
    Calibration:
    Two to five points stored

    Analog to Digital Measurement:
    Rate 80 Hz

    Internal Resolution:
    53,687,100 counts per mV/V per second

    Digital Filtering :
    Harmonizer filtering with adaptable constant and threshold

    Self Diagnostics :
    Display, keys, inputs, outputs, serial port

  3. Get A Quote
    • 1 + 11 =
  4. Technical
    INPUT/OUTPUTRemote Inputs :
    Three logic level inputs for Zero, Print, Tare, Units or F1Standard Outputs :
    Three set point outputs, open collector designSerial Ports :
    Two serial ports: – Comm 1 RS232 full duplex – Comm 2 RS232 full duplex Or – Comm 1 RS232 full duplex with handshaking – Comm 2 Not available Programmable serial response to ASCII input SMA protocol, broadcast, enquireUSB Host :
    Printer Connect USB flash memoryEthernet:
    Ethernet IP, FTP, Modbus TCP and DHCP

    Optional :
    Analog output Current Loop/RS485/RS422 USB Device Internal Wireless 802.11b/g

    ELECTRICAL

    Power Requirements :
    Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC Power consumption: estimated at 200 mA at 12 VDC for one weight sensor and 250 mA at 12 VDC for six weight sensors.

    Excitation :
    5 VDC, short circuit protected Supports up to six 350 ohm weight sensors 4 or 6 conductors with sense leads Detachable plug connectors

    Analog Signal Input Range:
    -1 m/V/V to 5 mV/V

    Analog Signal Sensitivity:
    µV/V/divisions minimum 0.5 µV/V/divisions recommended

    Circuitry Protection:
    RFI, EMI and ESD protection